CD4018BPWE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 17MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4018 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 550 ns |
| Quiescent Current | 100μA |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Unidirectional |
| Logic Type | Divide-by-N |
| Number of Bits per Element | 5 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.03mA |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 8.5MHz |
| Timing | Synchronous |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4018BPWE4 Overview
This device is supplied in the 16-TSSOP (0.173, 4.40mm Width) package. This configuration uses 16terminations. 5Vis fully flexible due to its voltage supply. The 1elements are connected by wires. There are a total of 16 pins in all components. In this case, it is packaged as Tube. As part of the circuit, there are 16pins that connect other components. Surface Mountis the way in which it is mounted. As a member of 4000B series, it is well suited for various applications. Divide-by-Nis used as the logic type. It is recommended to set the operating temperature to -55°C~125°C. Having a mounting type of [0], it is suitable for installation. When the supply voltage is set to [0], it is able to operate with greater reliability. The array consists of elements storing 5bits each. Pbfree code may result in yes. Among its base part number [0], you will find additional parts that are related. There is 3V minimum supply voltage (Vsup) for this device. The frequency of the system is 17MHz. There is a quiescent current consumption at 100μA.
CD4018BPWE4 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
5 bits per element
Frequency of 17MHz
CD4018BPWE4 Applications
There are a lot of Texas Instruments CD4018BPWE4 Counters & Dividers applications.
- ANALOG SIGNAL PROCESSING
- Programmable binary and decade
- Time delay circuits
- Divide-by"N" counters/frequency synthesizers
- Communications Digital Frequency Synthesizers;
- Binary counter/decoder
- POWER COMPUTATION
- Frequency division
- LINEARIZATION
- Timers
