CD40192BNSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 11MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD40192 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 600 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 600 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Counter, Decade |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.03mA |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 5.5MHz |
| Timing | Synchronous |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD40192BNSR Overview
This device is packaged in a 16-SOIC (0.209, 5.30mm Width) package. In order to configure it, it uses 16terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. A wire connects the 1elements. The total number of component pins is 16. Packaging is based on Cut Tape (CT). In the circuit, 16pins are used to connect other components. Surface Mountis the way in which it is mounted. Having been designed as a member of the 4000Bseries, it is well suited for use in a wide range of applications. Counter, Decadeis adopted as the logic type. In this case, the operating temperature should be set to -55°C~125°C. It adopts a mounting type of Surface Mount. Providing a voltage of 3V~18Vensures higher reliability of operation. The array has 4elements. Pbfree code may produce the result yes. In regard to this electronic device, TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCKare essential features. Among its base part number [0], you will find additional parts that are related. In order to pack the product, TRis employed. There is 3V minimum supply voltage (Vsup) for this device. The frequency of the device is 11MHz. In the state of [0], it consumes quiescent current.
CD40192BNSR Features
Embedded in the 16-SOIC (0.209, 5.30mm Width) package
4 bits per element
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
Frequency of 11MHz
CD40192BNSR Applications
There are a lot of Texas Instruments CD40192BNSR Counters & Dividers applications.
- Binary counter/decoder
- Frequency division
- Digital multiplexing and demultiplexing
- Control counters
- Dual Up Counters
- Analog multiplexing and demultiplexing
- Divide-by"N" counters/frequency synthesizers
- DIVISION
- Clocks
- counting/frequency sy nthesizers-BCD output
