CD40193BNSRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 11MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD40193 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 600 ns |
| Quiescent Current | 100μA |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.03mA |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 5.5MHz |
| Timing | Synchronous |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD40193BNSRE4 Overview
A 16-SOIC (0.209, 5.30mm Width)package is used for this device. For its configuration, 16terminations are used. Having a supply voltage of 5V enables to operate in a fully flexible manner. In wires, 1elements are connected. The number of all component pins is 16. Packaging is based on Tape & Reel (TR). To connect the circuit's other components, there are 16pins. It is mounted in the way of [0]. This device is a member of the 4000Bseries and is well suited for a wide range of applications. Binary Counteris used as the logic type. Ideally, the operating temperature should be set to -55°C~125°C. In this case, it is mounted with a Surface Mounttype. It is able to operate with higher reliability when the supply voltage of 3V~18V is provided. The array has 4elements. The result may be yeswhen expressing the result in Pbfree code. It is important to note that TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCKare really important features of this electronic device. It should be noted that there are more related parts under the CD40193base part number. It is packed using [0]. A voltage of 3V is the minimum supply voltage (Vsup). There is 11MHz frequency associated with it. During quiescent mode, it consumes 100μA current.
CD40193BNSRE4 Features
Embedded in the 16-SOIC (0.209, 5.30mm Width) package
4 bits per element
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
Frequency of 11MHz
CD40193BNSRE4 Applications
There are a lot of Texas Instruments CD40193BNSRE4 Counters & Dividers applications.
- Fixed or Programmable Frequency Division
- Frequency division
- Communications Digital Frequency Synthesizers;
- Binary counter/decoder
- VHF, UHF, FM, AM, etc.
- Frequency dividing circuits
- Signal gating
- Time-delay circuits
- Counter control/timers
- Clocks
