CD40193BPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 11MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD40193 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 600 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 600 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.03mA |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 5.5MHz |
| Timing | Synchronous |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD40193BPW Overview
In the 16-TSSOP (0.173, 4.40mm Width)package, it is supplied. This configuration uses 16terminations. Having a supply voltage of 5V enables to operate in a fully flexible manner. An interconnection of 1elements is provided by wires. The total number of component pins is 16. Packaging is based on Tube. Circuit components are connected by 16pins. To mount it, use the method of [0]. As a member of 4000B series, it is well suited for various applications. In this case, the logic type is set to [0]. The operating temperature should be set at -55°C~125°C. Mounting type Surface Mountis used. It is able to operate with higher reliability when the supply voltage of 3V~18V is provided. There are 4 bits stored in each element of the array. Based on the Pbfree code, the result may be yes. It is important to note that in regards to this electronic device, TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCKis an extremely significant feature. More related parts are available under its base part number CD40193. A voltage of 3V is the minimum supply voltage (Vsup). It operates with the frequency of 11MHz. As long as 100μAis maintained, it consumes quiescent current.
CD40193BPW Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
Frequency of 11MHz
CD40193BPW Applications
There are a lot of Texas Instruments CD40193BPW Counters & Dividers applications.
- Dual Up Counters
- Programmable binary and decade
- counting/frequency sy nthesizers-BCD output
- Clocks
- Frequency division
- Up Counters
- Fixed and programmable counters greater than 10
- Analog multiplexing and demultiplexing
- DIVISION
- Decade counter/decimal decode display (CD4017B）
