CD4020BPWE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 24MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4020 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 12 |
| Propagation Delay | 360 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 360 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.03mA |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4020BPWE4 Overview
A device of this type is supplied in a package of type [0]. For its configuration, 16terminations are used. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. In this diagram, there are 1elements that are interconnected by wires. There are 16pins on all components. Packaging is based on Tube. To connect the circuit's other components, there are 16pins. The Surface Mountway is used to mount it. Due to the fact that it is a member of the 4000Bseries, it has a wide range of applications. Binary Counteris selected as the logic type. In this case, the operating temperature should be set to -55°C~125°C. The mounting type is Surface Mount. When the supply voltage is set to [0], it is able to operate with greater reliability. There are 14bits stored in each element of the array. In the device, the information consists of 12 bits. Based on Pbfree code, this may result in yes. The base part number of CD4020provides access to more related parts. Supply voltages can be as low as 3V volts (Vsup). Frequency 24MHzdetermines its operation. During quiescent mode, it consumes 100μA current.
CD4020BPWE4 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
14 bits per element
Frequency of 24MHz
CD4020BPWE4 Applications
There are a lot of Texas Instruments CD4020BPWE4 Counters & Dividers applications.
- Timing applications
- VHF, UHF, FM, AM, etc.
- Time Out Timer for Consumer-Application Industrial Controls
- Dual Up Counters
- Timers
- Communications Digital Frequency Synthesizers;
- Analog multiplexing and demultiplexing
- Frequency division
- Counter control/timers
- TRUE RMS-TO-DC CONVERSION
