CD4026BPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4026 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Bits | 7 |
| Propagation Delay | 600 ns |
| Quiescent Current | 100μA |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Counter, Decade |
| Number of Bits per Element | 5 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.03mA |
| fmax-Min | 8 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Timing | Synchronous |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4026BPWR Overview
This is a device supplied in the 16-TSSOP (0.173, 4.40mm Width) package. In order to configure it, it uses 16terminations. The supply voltage of 5V permits it to operate with full flexibility. There are wires connecting 1elements. In all, there are 16 pins on each component. In this case, it is packaged as Cut Tape (CT). As part of the circuit, there are 16pins that connect other components. To mount it, use the method of [0]. Having been designed as a member of the 4000Bseries, it is well suited for use in a wide range of applications. It is decided to use the logic type [0]. It is recommended that the operating temperature be set to -55°C~125°C. Having a mounting type of [0], it is suitable for installation. As a result, the device operates more reliably when a supply voltage of 3V~18Vis applied. The array consists of elements storing 5bits each. The device contains 7bits of information. In terms of Pbfree code, the result may be yes. The base part number of CD4026provides access to more related parts. It is packed with [0]. Supply voltage (Vsup) can be as low as 3V. In this case, the frequency is 16MHz Hz. It consumes quiescent current at 100μA.
CD4026BPWR Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
5 bits per element
Frequency of 16MHz
CD4026BPWR Applications
There are a lot of Texas Instruments CD4026BPWR Counters & Dividers applications.
- VHF, UHF, FM, AM, etc.
- Programmable binary and decade
- Analog multiplexing and demultiplexing
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- POWER COMPUTATION
- Frequency dividers
- Signal gating
- Communications Digital Frequency Synthesizers;
- Programmable decade counters
- Fixed or Programmable Frequency Division
