CD4027BM96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | CD4027 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Clock Frequency | 24MHz |
| Propagation Delay | 45 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 45 ns |
| Logic Function | AND |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 90ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.06mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3500000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4027BM96 Overview
16-SOIC (0.154, 3.90mm Width)is the way it is packaged. Package Tape & Reel (TR)embeds it. In the configuration, Differentialis used as the output. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 3V~18Vvolts. Currently, the operating temperature is -55°C~125°C TA. The type of this D latch is JK Type. This type of FPGA is a part of the 4000B series. This D flip flop should not have a frequency greater than 24MHz. As a result, it consumes 4μA quiescent current. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. D latch belongs to the CD4027 family. It is powered from a supply voltage of 5V. Its input capacitance is 5pFfarads. There is an electronic component mounted in the way of Surface Mount. It is designed with 16 pins. Its clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. The supply voltage (Vsup) should be maintained above 3V for normal operation. In order to achieve its superior flexibility, 2 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with TR. As a result of its output current of 6.8mA, it is very flexible in terms of design. It consumes 20μA of quiescent current without being affected by external factors.
CD4027BM96 Features
Tape & Reel (TR) package
4000B series
16 pins
CD4027BM96 Applications
There are a lot of Texas Instruments CD4027BM96 Flip Flops applications.
- Single Up Count-Control Line
- Frequency Divider circuits
- EMI reduction circuitry
- Memory
- Bus hold
- Frequency division
- Event Detectors
- Computers
- ESD protection
- Test & Measurement
