CD4027BMT
| Parameters | |
|---|---|
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Type | JK Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4027 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Clock Frequency | 24MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 45 ns |
| Logic Function | AND |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 90ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.06mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3500000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
CD4027BMT Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. A package named Tape & Reel (TR)includes it. Currently, the output is configured to use Differential. This trigger is configured to use Positive Edge. Surface Mountmounts this electrical part. A 3V~18Vsupply voltage is required for it to operate. It is operating at -55°C~125°C TA. This logic flip flop is classified as type JK Type. In terms of FPGAs, it belongs to the 4000B series. You should not exceed 24MHzin its output frequency. As a result, it consumes 4μA quiescent current. 16terminations have occurred. Members of the CD4027family make up this object. Power is provided by a 5V supply. A 5pFfarad input capacitance is provided by this T flip flop. There is an electronic part that is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. Keeping the supply voltage (Vsup) above 3V is necessary for normal operation. In order to achieve its superior flexibility, 2 circuits are used. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. As a result of its output current of 6.8mA, it is very flexible in terms of design. Quiescent current is consumed by the D latch in the amount of 20μA.
CD4027BMT Features
Tape & Reel (TR) package
4000B series
16 pins
CD4027BMT Applications
There are a lot of Texas Instruments CD4027BMT Flip Flops applications.
- Registers
- Circuit Design
- Memory
- Individual Asynchronous Resets
- Shift registers
- Single Up Count-Control Line
- Control circuits
- Data transfer
- EMI reduction circuitry
- Guaranteed simultaneous switching noise level
