CD4027BNSRG4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 24MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 45 ns |
| Logic Function | AND, Flip-Flop |
| Logic IC Type | J-K FLIP-FLOP |
| High Level Output Current | -4.2mA |
| Low Level Output Current | 6.8mA |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4027BNSRG4 Overview
In the form of SOP, it has been packaged. Package Tape & Reel (TR)embeds it. There are 2 elements in it. There are 16 terminations,A voltage of 5V is used as the power supply for this D latch. Surface Mount mounts this electronic component. This board is designed with 16pins on it. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. There are 2bits in its design. Considering its reliability, this T flip flop is well suited for TR. In order for the chip to function, it has 1output lines. Quiescent current is consumed by the D latch in the amount of 20μA. The high level output current is set to -4.2mA. It is set to 6.8mAfor the low level output current. Ideally, the operating temperature should be lower than 125°C. Operating temperatures should be above -55°C. It is powered by 3V as its minimum supply voltage. 18Vis the maximum supply voltage it supports. It is possible to achieve 24MHz frequencies. J-K FLIP-FLOPis used as the logic IC in this D flip flop. It is equipped with 2 functions . It has 16 pins.
CD4027BNSRG4 Features
Tape & Reel (TR) package
16 pins
2 Bits
2 Functions
16 pin count
CD4027BNSRG4 Applications
There are a lot of Texas Instruments CD4027BNSRG4 Flip Flops applications.
- Latch
- ATE
- Shift Registers
- Digital electronics systems
- Memory
- Load Control
- Buffered Clock
- CMOS Process
- Single Down Count-Control Line
- Test & Measurement
