CD4028BPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | CD4028 |
| Pin Count | 16 |
| Number of Outputs | 10 |
| Number of Elements | 1 |
| Circuit | 1 x 4:10 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 10 |
| Propagation Delay | 350 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 350 ns |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 4 |
| Current - Output High, Low | 6.8mA 6.8mA |
| Supply Type | Dual, Single |
| Bandwidth | 8MHz |
| Power Supply Current-Max (ICC) | 0.3mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4028BPW Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.Tube is the method used for packaging.Digital switch ic uses a Surface Mount mounting method.In the multiplexers, the analog IC Decoder is used.By keeping the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 3V~18V voltage.With the 4000B series, the multiplexers are suitable for a diverse range of applications.Among its basic features are 16 terminations.There is a base part number CD4028 that can be used to locate signal switch's related components as well.In multiplexer's system, 5V is the voltage supplied.This turn signal switch contains 16 component pins.It employs GULL WING as the point at which conductors come to an end.Dual, Single is used as its supply type.This multiplexer ic is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.Signal multiplexer contains 10 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 3V.This turn signal switch has 10 outputs designed for its operation.There are no external influences on this multiplexer ic, so it consumes 100μA current.The multiplexer is equipped with 4 inputs.This mux switch configuration has 1 elements.
CD4028BPW Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual, Single
CD4028BPW Applications
There are a lot of Texas Instruments CD4028BPW Signal Switches / Multiplexers / Decoders applications.
- Make half adder
- Analog, digital or video signal switching
- LVDS
- Data demultiplexing
- Data communication
- Signal router
- Enabling block of memory depending on address in memory chips
- Make full adder
- Speed synchronization of multiple motors in industries
- Video transmission
