CD4029BPWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | BINARY/BCD COUNT OPTION; TCO OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 11MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4029 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter, Decade |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 500 ns |
| fmax-Min | 5.5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Timing | Synchronous |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
CD4029BPWG4 Overview
A 16-TSSOP (0.173, 4.40mm Width)package is used for this device. In order to configure it, it uses 16terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. In this diagram, there are 1elements that are interconnected by wires. There are 16pins on all components. It is packaged in a manner consistent with Tube. Circuit components are connected with 16pins. Using [0], it can be mounted. Due to the fact that it is a member of the 4000Bseries, it has a wide range of applications. Binary Counter, Decadeis adopted as the logic type. In this case, the operating temperature should be set to -55°C~125°C. Having a mounting type of [0], it is suitable for installation. By providing the supply voltage of [0], it is capable of operating more reliably. The array contains elements containing 4bits each. A major feature of this electronic device is its [0]. More related parts are available under its base part number CD4029. It takes supply voltage of 18V to operate. Supply voltage (Vsup) can be as low as 3V. The frequency of the system is 11MHz.
CD4029BPWG4 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
BINARY/BCD COUNT OPTION; TCO OUTPUT
Operating supply voltage of 18V
Frequency of 11MHz
CD4029BPWG4 Applications
There are a lot of Texas Instruments CD4029BPWG4 Counters & Dividers applications.
- SQUARE ROOT
- counting/frequency sy nthesizers-BCD output
- SQUARING
- Fixed and programmable counters greater than 10
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Clocks
- Frequency dividers
- Time-delay circuits
- Signal gating
- MULTIPLICATION
