CD4042BDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Additional Feature | PROGRAMMABLE TRIGGER TYPE |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | CD4042 |
| Pin Count | 16 |
| Output Type | Differential |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 4 |
| Propagation Delay | 500 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 40 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6.8mA 6.8mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 200 ns |
| Trigger Type | NEGATIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Output Lines | 4 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4042BDT Overview
In the 16-SOIC (0.154, 3.90mm Width) package, it is embedded. Tape & Reel (TR) is the packaging method. In its configuration, Differential is used as the output. The Logic type of this electrical device is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. A 3V~18V voltage supply is required for operation. It is -55°C~125°C at the operating temperature. This FPGA is part of the 4000B series. 4 Bits are used in the design of this electronic part. As far as this device is concerned, it has no terminations. It belongs to CD4042 family. The device works with a voltage of 5V for its supply voltage. With 16 pins, it is equipped. With the design of the board, there are only 16 pins. A Surface Mount mounting method has been used for this electronic part. It belongs to the subcategory of FF/Latches. In order to operate properly, the supply voltage (Vsup) should be greater than 3V. Based on its reliable performance, this device is appropriate for TR. Its output current of 6.8mA ensures maximum design flexibility. Regardless of the input line, the binary equivalent of the input line will be generated by the 4 output lines. The quiescent current consumed by it is 20μA because it is unaffected by external factors. In order to achieve its superior flexibility, 1 circuits are used. There are also other characteristics of it, such as PROGRAMMABLE TRIGGER TYPE. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.06mA.
CD4042BDT Features
16-SOIC (0.154, 3.90mm Width) package
4000B series
4 Bits
CD4042 family
16 pin count
16 pins
CD4042BDT Applications
There are a lot of Texas Instruments CD4042BDT Latches applications.
- TV Set-top Boxes
- Communication systems
- Address register
- Clocks
- Storage
- Pattern generators
- Hammer Device Information
- Relay
- Network Switches
- Sample and hold register
