CD4042BNSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | PROGRAMMABLE TRIGGER TYPE |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4042 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 4 |
| Propagation Delay | 100 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 40 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6.8mA 6.8mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 200 ns |
| Trigger Type | NEGATIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Output Lines | 4 |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4042BNSR Overview
16-SOIC (0.209, 5.30mm Width) contains it. Packaged in the way of Tape & Reel (TR). It uses Differential as the output. A D-Type Transparent Latch logic type is used in this electrical device. A Surface Mount mount is used for mounting this electronic part. There is no supply voltage for this device. It is -55°C~125°C at the operating temperature. An FPGA in this series belongs to the 4000B family. It is designed with 4 bits. The device consists of 16 terminations that are designed to be used in conjunction with it. It is a member of the CD4042 family. In order to operate it, the supply voltage must be 5V. There are 16 pins attached to it. The 16 pins are designed into it. Surface Mount is used to mount this electronic part. Subcategory FF/Latches includes this part. There should be a voltage supply (Vsup) greater than 3V. The device's reliable performance makes it a good choice for TR. It features maximum flexibility in design due to 6.8mA output current. Input lines are converted into binary equivalents by 4 output lines. Without external influences, it consumes 20μA quiescent current. To achieve its exceptional flexibility, it relies on 1 circuits. PROGRAMMABLE TRIGGER TYPE are also a characteristic of it. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.06mA.
CD4042BNSR Features
16-SOIC (0.209, 5.30mm Width) package
4000B series
4 Bits
CD4042 family
16 pin count
16 pins
CD4042BNSR Applications
There are a lot of Texas Instruments CD4042BNSR Latches applications.
- Serial Output Register
- Automotive Body Electronics
- Synchronous frequency dividers
- Frequency dividing
- Relay replacement
- Parallel data storage
- Buffer Storage
- Shift right with parallel loading
- Storage
- Network Switches
