CD4042BPW
| Parameters | |
|---|---|
| Additional Feature | PROGRAMMABLE TRIGGER TYPE |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4042 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 4 |
| Propagation Delay | 100 ns |
| Quiescent Current | 40nA |
| Turn On Delay Time | 40 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6.8mA 6.8mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 200 ns |
| Trigger Type | NEGATIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Output Lines | 4 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
CD4042BPW Overview
There is an embedded version of it in package 16-TSSOP (0.173, 4.40mm Width). As a result, it has a packaging of Tube. It uses the output configuration Differential. There is a logic type of D-Type Transparent Latch associated with this electrical device. Based on the way of Surface Mount, this electronic part is mounted. It operates at a voltage of 3V~18V. A temperature of -55°C~125°C is set as the operating temperature. The 4000B series contains FPGAs of this type. It is designed with 4 bits. A device such as this has 16 terminations designed. This type belongs to the CD4042 family. In order to operate it, the supply voltage must be 5V. 16 pins are provided. With the design of the board, there are only 16 pins. Mounting this electronic component follows the Surface Mount method. There is a subcategory of FF/Latches for this part. (Vsup) should be greater than 3V. Its output current of 6.8mA ensures maximum design flexibility. 4 output lines provide binary equivalents of input lines. Without external influences, it consumes 40nA quiescent current. Its superior flexibility is achieved by using 1 circuits. It also has characteristics of PROGRAMMABLE TRIGGER TYPE. When the maximum power current (ICC) is supplied for its operation, it reaches 0.06mA.
CD4042BPW Features
16-TSSOP (0.173, 4.40mm Width) package
4000B series
4 Bits
CD4042 family
16 pin count
16 pins
CD4042BPW Applications
There are a lot of Texas Instruments CD4042BPW Latches applications.
- BCD counting
- Counting
- Buffer/Storage Registers
- Parallel-to-Serial Data Conversion
- High-speed logic
- Counter control
- Automotive Infotainment
- Hammer Device Information
- Timers
- Phase comparator
