CD4042BPWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | PROGRAMMABLE TRIGGER TYPE |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4042 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 4 |
| Propagation Delay | 100 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6.8mA 6.8mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 220 ns |
| Trigger Type | NEGATIVE EDGE |
| Number of Output Lines | 4 |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
CD4042BPWRG4 Overview
In the 16-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. Tape & Reel (TR) is the way in which it is packaged. Differential is used for the output it is configured with. There is D-Type Transparent Latch logic type for this electrical device. Electronic parts are mounted in accordance with Surface Mount. A 3V~18V supply voltage is required to operate it. The operating temperature is -55°C~125°C. 4000B is the series number of this FPGA. Electronic parts with 4 bits are designed for this application. As far as this device is concerned, it has no terminations. The family CD4042 includes it. With the supply voltage set at 5V, it is able to operate. It is equipped with 16 pin count. In addition, it is designed with a pin number of 16. Surface Mount is the method used for mounting this electronic part. This part is included in FF/Latches. If the supply voltage (Vsup) is greater than 3V, then the device is working correctly. The reliability of this device makes it well suited to TAPE AND REEL. As the output current is 6.8mA, the design flexibility is maximum. Regardless of the input line, the binary equivalent of the input line will be generated by the 4 output lines. It achieves superior flexibility by using 1 circuits. PROGRAMMABLE TRIGGER TYPE are other characteristics of it.
CD4042BPWRG4 Features
16-TSSOP (0.173, 4.40mm Width) package
4000B series
4 Bits
CD4042 family
16 pin count
16 pins
CD4042BPWRG4 Applications
There are a lot of Texas Instruments CD4042BPWRG4 Latches applications.
- Stacked or Push-Down Registers
- General-Purpose Register
- A/D and D/A conversion
- Counter control
- Parallel-to-Serial Data Conversion
- Digital bus buffer
- Display driver
- Relay
- Hammer
- Automotive HEV/EV Powertrain
