CD4043BDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | CD4043 |
| Pin Count | 16 |
| Output Type | Tri-State |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 4 |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 50 ns |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.8mA 6.8mA |
| Logic Type | S-R Latch |
| Trigger Type | HIGH LEVEL |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Input Lines | 8 |
| Independent Circuits | 4 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4043BDRG4 Overview
The package in which it is embedded is named 16-SOIC (0.154, 3.90mm Width). This package has the format of Tape & Reel (TR). Tri-State is used for the output it is configured with. There is a logic type of S-R Latch associated with this electrical device. A Surface Mount mount is used for mounting this electronic part. The voltage supply is 3V~18V. There is -55°C~125°C operating temperature. An FPGA in this series belongs to the 4000B family. With this electronic part, there are 4 bits. A device with this design has 16 terminations. There is no doubt that it belongs to the family CD4043. In order to function, the supply voltage should be set to 5V. The device is equipped with 16 pins. With the design of the board, there are only 16 pins. A Surface Mount mounting method has been used for this electronic part. A voltage greater than 3V must be supplied as a power supply (Vsup). Input Lines consist of electronic circuits, and there are 8. The reliability of this device makes it well suited to TR. With 6.8mA, maximum design flexibility is ensured. Without external influences, it consumes 20μA quiescent current. The superior flexibility of the system is achieved through its use of 1 circuits. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.06mA is needed for operation.
CD4043BDRG4 Features
16-SOIC (0.154, 3.90mm Width) package
4000B series
4 Bits
CD4043 family
16 pin count
16 pins
CD4043BDRG4 Applications
There are a lot of Texas Instruments CD4043BDRG4 Latches applications.
- Digital bus buffer
- Shift right register
- Display
- Counting
- Serial Output Register
- Parallel Input
- Parallel data storage
- Timers
- Multistage ripple counting
- Address register
