CD4043BE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | CD4043 |
| Pin Count | 16 |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Output Current | 6.8mA |
| Max Supply Current | 40nA |
| Number of Bits | 4 |
| Propagation Delay | 50 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 50 ns |
| Logic Function | Latch, NOR |
| Current - Output High, Low | 6.8mA 6.8mA |
| Logic Type | S-R Latch |
| Trigger Type | HIGH LEVEL |
| Input Capacitance | 5pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4043BE Overview
In the 16-DIP (0.300, 7.62mm) package, it is embedded. It is packaged in the way of Tube. It uses Tri-State as the output. This electrical device has the logic type S-R Latch. Through Hole is used to mount this electronic part. A 3V~18V supply voltage is required to operate it. During operation, the temperature is set at -55°C~125°C. In the 4000B series, this FPGA is located. With this electronic part, there are 4 bits. This device is designed with 16 terminations. It is a member of the CD4043 family. A 5V voltage supply is required for operation. With 16 pins, it is equipped. The pin configuration of the device is 16. A Through Hole mounting method has been used for this electronic part. FF/Latches is the subcategory of this part. Ensure that the supply voltage (Vsup) is greater than 3V. It contains 8 input lines where electronic circuits are present. With 6.8mA, maximum design flexibility is ensured. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines. As far as external factors are concerned, it consumes 20μA of quiescent current without getting affected by them. 1 elements are present in it. Maximum power supply (ICC) for its operation is 0.06mA.
CD4043BE Features
16-DIP (0.300, 7.62mm) package
4000B series
4 Bits
CD4043 family
16 pin count
16 pins
1 elements
CD4043BE Applications
There are a lot of Texas Instruments CD4043BE Latches applications.
- Parallel Input
- Communication systems
- Parallel data storage
- Four-bit storage with output enable
- Pseudo-random code generators
- Address register
- Decade counting
- Up-Down Johnson
- Parallel data storage
- Automotive Infotainment
