CD4043BNSRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | CD4043 |
| Pin Count | 16 |
| Output Type | Tri-State |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 4 |
| Propagation Delay | 300 ns |
| Quiescent Current | 40nA |
| Turn On Delay Time | 50 ns |
| Logic Function | Latch, NOR |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.8mA 6.8mA |
| Logic Type | S-R Latch |
| Trigger Type | HIGH LEVEL |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Input Lines | 8 |
| Independent Circuits | 4 |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4043BNSRE4 Overview
It is embedded in the 16-SOIC (0.209, 5.30mm Width) package. It is packaged in the way of Tape & Reel (TR). There is a Tri-State output configured. There is a logic type of S-R Latch associated with this electrical device. Surface Mount is used to mount this electronic part. A 3V~18V voltage supply is required for operation. There is -55°C~125°C operating temperature. There are a number of FPGAs in this series, including this one. Electronic parts with 4 bits are designed for this application. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the CD4043 family. With the supply voltage set at 5V, it is able to operate. 16 pins are included. There are 16 pins on it. Mounting this electronic component follows the Surface Mount method. This part is included in FF/Latches. It is recommended to have a higher supply voltage (Vsup) than 3V. It consists of 8 input lines from which an electronic circuit can be built. Its reliable performance makes it an excellent choice for TR. It features maximum flexibility in design due to 6.8mA output current. It consumes 40nA of quiescent current without being affected by external factors. In order to achieve its superior flexibility, 1 circuits are used. Its maximum current supply (ICC) reaches 0.06mA.
CD4043BNSRE4 Features
16-SOIC (0.209, 5.30mm Width) package
4000B series
4 Bits
CD4043 family
16 pin count
16 pins
CD4043BNSRE4 Applications
There are a lot of Texas Instruments CD4043BNSRE4 Latches applications.
- A/D and D/A conversion
- Pattern Generators
- Parallel-to-Serial Data Conversion
- Synchronous frequency dividers
- Timers
- Parallel data storage
- Parallel Input
- Shift right with parallel loading
- Instrumentation
- Double bus register system
