CD4043BPWRE4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Load Capacitance | 50pF |
| Current - Output | 6.8mA |
| Number of Bits | 4 |
| Propagation Delay | 300 ns |
| Quiescent Current | 40nA |
| Turn On Delay Time | 50 ns |
| Logic Function | Latch, NOR |
| Output Characteristics | 3-STATE |
| Logic IC Type | R-S LATCH |
| Trigger Type | HIGH LEVEL |
| High Level Output Current | -4.2mA |
| Low Level Output Current | 4.2mA |
| Number of Input Lines | 8 |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4043BPWRE4 Overview
There is an embedded version of it in package TSSOP. Tape and Reel is the packaging method. The design of this electronic part contains 4 bits. A device such as this has 16 terminations designed. It operates with a supply voltage of 5V. There are 16 pins attached to it. There are 16 pins on it. The electronic part is mounted using the Surface Mount method. There is a subcategory of FF/Latches for this part. An electronic circuit can be found on 8 input lines. Without external influences, it consumes 40nA of quiescent current. A total of 1 elements are contained in it. 4.2mA is set as the low level output current. There is -4.2mA high level output current set. Lower than 125°C is the ideal operating temperature. The operating temperature should be higher than -55°C. 18V is the maximum voltage it supports. It operates with the minimal supply voltage of 3V. R-S LATCH is the logic IC it uses. With an output current of 6.8mA, it is highly flexible in terms of design.
CD4043BPWRE4 Features
TSSOP package
4 Bits
16 pin count
16 pins
1 elements
CD4043BPWRE4 Applications
There are a lot of Texas Instruments CD4043BPWRE4 Latches applications.
- Parallel Input
- TV Set-top Boxes
- Digital bus buffer
- Bus system register with enable parallel lines at bus side
- Counter control
- Pseudo-random code generators
- Shift Registers
- Flip-flops
- Meter applications
- Instrumentation
