CD4044BDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | CD4044 |
| Pin Count | 16 |
| Output Type | Tri-State |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 4 |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 50 ns |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.8mA 6.8mA |
| Logic Type | S-R Latch |
| Trigger Type | LOW LEVEL |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Input Lines | 8 |
| Independent Circuits | 4 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4044BDR Overview
16-SOIC (0.154, 3.90mm Width) contains it. As a result, it has a packaging of Tape & Reel (TR). In its configuration, Tri-State is used as the output. In this electrical device, the logic type is S-R Latch. Surface Mount is used to mount this electronic part. The voltage supply is 3V~18V. The operating temperature is -55°C~125°C. The 4000B series of FPGAs is the one this FPGA belongs to. With this electronic part, there are 4 bits. This device has 16 terminations. It belongs to CD4044 family. With a supply voltage of 5V, it operates. The 16 pind are equipped with it. With the design of the board, there are only 16 pins. Surface Mount is the way in which this electronic part is mounted. If the supply voltage (Vsup) is greater than 3V, then the device is working correctly. An electronic circuit can be found on 8 input lines. As a result of its reliable performance, it is well suited for TR. With 6.8mA, maximum design flexibility is ensured. Without external influences, it consumes 20μA of quiescent current. Its superior flexibility is achieved by using 1 circuits. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.06mA is needed for operation.
CD4044BDR Features
16-SOIC (0.154, 3.90mm Width) package
4000B series
4 Bits
CD4044 family
16 pin count
16 pins
CD4044BDR Applications
There are a lot of Texas Instruments CD4044BDR Latches applications.
- Storage
- Buffer/Storage Registers
- General-Purpose Register
- Up/down difference counting
- Buffer register
- Watches
- Synchronous frequency dividers
- Pattern generators
- Serial Input
- Shift register
