CD4044BPWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4044 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 4 |
| Propagation Delay | 100 ns |
| Turn On Delay Time | 50 ns |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.8mA 6.8mA |
| Logic Type | S-R Latch |
| Prop. Delay@Nom-Sup | 300 ns |
| Trigger Type | LOW LEVEL |
| Number of Input Lines | 8 |
| Independent Circuits | 4 |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
CD4044BPWE4 Overview
The package in which it is embedded is named 16-TSSOP (0.173, 4.40mm Width). A Tube package is used to package it. It uses Tri-State as the output. This electrical device has Logic type S-R Latch. Electronic components are mounted using the Surface Mount method. A 3V~18V voltage supply is required for operation. A temperature of -55°C~125°C is set as the operating temperature. The 4000B series contains FPGAs of this type. Electronic parts with 4 bits are designed for this application. The device consists of 16 terminations that are designed to be used in conjunction with it. As a member of the CD4044 family, it falls under that category. In order to operate it, the supply voltage must be 5V. The device is equipped with 16 pins. Designed with 16 pins, it is compatible with a wide range of devices. The electronic part is mounted using the Surface Mount method. (Vsup) should be greater than 3V. There are 8 input lines in which electronic circuits are present. As the output current is 6.8mA, the design flexibility is maximum. 1 circuits are used to provide this superior level of flexibility.
CD4044BPWE4 Features
16-TSSOP (0.173, 4.40mm Width) package
4000B series
4 Bits
CD4044 family
16 pin count
16 pins
CD4044BPWE4 Applications
There are a lot of Texas Instruments CD4044BPWE4 Latches applications.
- Four-bit storage with output enable
- Parallel Input
- Shift right with parallel loading
- Programmable binary
- Accumulator Registers
- Ring counter
- Counting
- BCD counting
- Hammer
- Registers
