CD4044BPWRG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Load Capacitance | 50pF |
| Current - Output | 6.8mA |
| Number of Bits | 4 |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 50 ns |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Trigger Type | LOW LEVEL |
| High Level Output Current | -4.2mA |
| Low Level Output Current | 4.2mA |
| Number of Input Lines | 8 |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4044BPWRG4 Overview
There is an embedded version of it in package TSSOP. A package of Tape and Reel has been used. An electronic part with 4 bits is designed. This device has 16 terminations. The device works with a voltage of 5V for its supply voltage. 16 pins are provided. There are 16 pins on it. Surface Mount is used to mount this electronic part. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The quiescent current consumed by it is 20μA because it is unaffected by external factors. It consists of 1 elements. There is 4.2mA low level output current set. It is set to zero for the high level output current. Lower than 125°C is the ideal operating temperature. There should be a temperature above -55°C at which the device operates. There is a maximum supply voltage of 18V supported by this device. This device requires a minimum voltage of 3V. With 6.8mA, maximum design flexibility is ensured.
CD4044BPWRG4 Features
TSSOP package
4 Bits
16 pin count
16 pins
1 elements
CD4044BPWRG4 Applications
There are a lot of Texas Instruments CD4044BPWRG4 Latches applications.
- Programmable binary
- Avionics
- General-Purpose Register
- Shift register
- Parallel data synchronization
- Up/down difference counting
- Registers
- Timers
- Parallel Input
- Relay
