CD4051BCM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2002 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 1.05kOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 500mW |
| Base Part Number | 4051 |
| Number of Outputs | 1 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 5V |
| Nominal Supply Current | 20μA |
| Power Dissipation | 500mW |
| Propagation Delay | 55 ns |
| Turn On Delay Time | 1.2 μs |
| Logic Function | Demultiplexer, Multiplexer, Mux |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 5V~15V ±2.5V~7.5V |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Turn-Off Delay Time | 420 ns |
| Max Dual Supply Voltage | 7.5V |
| Number of Gates | 1 |
| -3db Bandwidth | 40MHz |
| On-State Resistance (Max) | 240Ohm |
| Min Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 50nA |
| Switch Time (Ton, Toff) (Max) | 320ns, 150ns |
| Channel-to-Channel Matching (ΔRon) | 5Ohm |
| Crosstalk | -40dB @ 3MHz |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4051BCM Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. This analog switch is mounted in Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. Temperatures around -55°C~125°C TA are extended for operation. This electronic part offers high-quality output due to its 1 channels. There are 1 circuits in this switch device. Try searching for 4051 variants of the analog switch ic. This digital multiplexer has 1.05kOhm internal resistance. The functions of 16 pins can be found in the datasheets. normally, users should not supply switches with voltages higher than 15V. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage the electronic part should receive is 5V. If put voltage greater than 7.5V on the multiplexer, damage may be caused to the device. In the case of dual power supplies, you should connect at least 2.5V. Among the inputs that can be operated are the 8 inputs. The transfer of data can be performed over 40MHz bandwidths. Temperatures higher than 125°C are not recommended for operation of the analogue multiplexer. The analog switch ics has 1 outputs. Suppliers offer 16-SOIC packages.
CD4051BCM Features
1 Channels
-3db Bandwidth: 40MHz
Bandwidth: 40MHz
CD4051BCM Applications
There are a lot of ON Semiconductor CD4051BCM Analog Switches & Multiplexers ICs applications.
- Routers
- Fiber In The Loop (FITL)
- Low-Voltage
- Microprocessor controlled systems
- Cellular phones
- DVD-R
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Ultrasound
- Automotive applications
- Avionics and Military Systems
