CD4051BCMX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 1.05kOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 500mW |
| Base Part Number | 4051 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 5V |
| Nominal Supply Current | 20μA |
| Power Dissipation | 500mW |
| Propagation Delay | 55 ns |
| Turn On Delay Time | 1.2 μs |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 5V~15V ±2.5V~7.5V |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Turn-Off Delay Time | 420 ns |
| Max Dual Supply Voltage | 7.5V |
| -3db Bandwidth | 40MHz |
| On-State Resistance (Max) | 240Ohm |
| Min Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 50nA |
| Switch Time (Ton, Toff) (Max) | 320ns, 150ns |
| Channel-to-Channel Matching (ΔRon) | 5Ohm |
| Crosstalk | -40dB @ 3MHz |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4051BCMX Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 8:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -55°C~125°C TA are extended for operation. Due to its 1 channels, the electrical component produces high-quality output. This multiplexer is composed of 1 circuits. Using the 4051 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 1.05kOhm. Please refer to the datasheets for 16 pins functions. It is normally recommended that users do not supply the multiplexer with voltages higher than 15V. A analog switch ic that has a cost-effective Dual, Single supply type. 5V is the lowest voltage that should be fed to the electronic electronic part. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 7.5V. The voltage should be at least 2.5V if you are using dual power supplies. Operating 8 inputs is required. This switch operates within the bandwidth of 40MHz. It is not recommended to operate the switches in an environment with a temperature higher than 125°C. The analogue multiplexer has 1 outputs. 16-SOIC package is offered by suppliers.
CD4051BCMX Features
1 Channels
-3db Bandwidth: 40MHz
Bandwidth: 40MHz
CD4051BCMX Applications
There are a lot of ON Semiconductor CD4051BCMX Analog Switches & Multiplexers ICs applications.
- Video signal routing
- Frame Relay Equipment
- Communications systems
- SDH
- Routers
- Central office
- Relay Replacement
- Remote Powered Equipment
- Optical Applications
- ATM
