Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 18 hours ago) |
Contact Plating |
Tin |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Number of Pins |
16 |
Weight |
951.693491mg |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
240Ohm |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Base Part Number |
CD4051 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Operating Supply Voltage |
18V |
Polarity |
Non-Inverting |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
20V |
Min Supply Voltage |
3V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Operating Supply Current |
80nA |
Nominal Supply Current |
80nA |
Propagation Delay |
60 ns |
Quiescent Current |
80nA |
Turn On Delay Time |
720 ns |
Input Voltage (Min) |
-0.5V |
Logic Function |
Demultiplexer, Multiplexer, Mux |
Input Voltage (Max) |
20.5V |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
3V~20V ±2.5V~9V |
Supply Type |
Dual, Single |
Bandwidth |
20MHz |
Supply Current-Max (Isup) |
3mA |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
450 ns |
Max Dual Supply Voltage |
9V |
On-State Resistance (Max) |
240Ohm |
Min Dual Supply Voltage |
2.5V |
Dual Supply Voltage |
3V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
40 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
0.2pF 30pF |
On-state Resistance Match-Nom |
15Ohm |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Switching |
BREAK-BEFORE-MAKE |
Min Supply Voltage (DC) |
3V |
Drain to Source Resistance |
240Ohm |
Normal Position |
NC |
Height |
5.08mm |
Length |
19.3mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD4051BE Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). To ensure high reliability, a new packaging method Tube is used. Through Hole is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operation at a temperature around -55°C~125°C TA. The total number of terminations is 16. A 8 channel electronic part produces high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. The circuits in this analogue multiplexer number 1. Look for analog switch ic variants by searching with CD4051. In this multiplexer, the internal resistance is 240Ohm. For functions related to 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 20V. Dual, Single supply type digital switch with a low cost. There should be 3V voltage fed to the electrical part below 3V. For this digital switch to work, 80nA current would suffice. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 9V. A dual power supply should have at least 2.5V voltage attached. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. The electrical part can be operated at 18V voltage levels. Among the inputs that can be operated are the 8 inputs. There are various bandwidths available for data transfer. A Drain to Source resistance of 240Ohm is shown for this electronic part.
CD4051BE Features
8 Channels
80nA Supply Current
Bandwidth: 20MHz
Drain-to-Source resistance: 240Ohm
CD4051BE Applications
There are a lot of Texas Instruments CD4051BE Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Low-Voltage
- Communications systems
- Data switching
- SONET
- T1/E1 Terminals
- Audio and video switching
- USB 1.1 signal switching circuits
- Private Branch Exchange (PBX)
- Cable Modem