Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
240Ohm |
Max Power Dissipation |
700mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
CD4051 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Operating Supply Voltage |
18V |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
20V |
Min Supply Voltage |
3V |
Operating Supply Current |
80nA |
Propagation Delay |
60 ns |
Turn On Delay Time |
720 ns |
Logic Function |
Multiplexer |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
3V~20V ±2.5V~9V |
Supply Type |
Dual, Single |
Bandwidth |
20MHz |
Supply Current-Max (Isup) |
3mA |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
450 ns |
Max Dual Supply Voltage |
9V |
On-State Resistance (Max) |
240Ohm |
Min Dual Supply Voltage |
2.5V |
Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
40 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
0.2pF 30pF |
On-state Resistance Match-Nom |
15Ohm |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Switching |
BREAK-BEFORE-MAKE |
Drain to Source Resistance |
125Ohm |
Normal Position |
NC |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD4051BM Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 8:1. Operating temperature around -55°C~125°C TA extended. In total, there have been 16 terminations. By its 8 channels, the electronic component provides high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. 1 circuits are used in this analogue multiplexer. Search with CD4051 if you are looking for analog multiplexer variants. This digital multiplexer has 240Ohm internal resistance. Datasheets for functions of 16 pins are available. It is generally not recommended to supply a voltage higher than 20V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. 3V should be the lowest voltage fed to the electronic component. An operating current of 80nA would be sufficient for this switch device. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 9V. When using dual power supplies, you should attach at least 2.5V. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. There is a voltage range of 18V operating voltages for the electrical part. Operating the 8 inputs requires 8 inputs. There are various bandwidths available for data transfer. Resistivity from Drain to Source is 125Ohm for this electronic part.
CD4051BM Features
8 Channels
80nA Supply Current
Bandwidth: 20MHz
Drain-to-Source resistance: 125Ohm
CD4051BM Applications
There are a lot of Texas Instruments CD4051BM Analog Switches & Multiplexers ICs applications.
- Industrial
- Cross Connects
- SONET
- Precision instrumentation
- Optical Applications
- CSU
- Relay Replacement
- Communications systems
- Power routing
- Automatic test equipment