CD4051BM96G3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 240Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | CD4051 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 18V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 80nA |
| Propagation Delay | 10 ns |
| Input Voltage (Min) | -0.5V |
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 20.5V |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 3V~20V ±2.5V~9V |
| Supply Type | Dual, Single |
| Bandwidth | 20MHz |
| Supply Current-Max (Isup) | 3mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 9V |
| On-State Resistance (Max) | 240Ohm |
| Min Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.2pF 30pF |
| On-state Resistance Match-Nom | 15Ohm |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 720ns |
| Switch-off Time-Max | 720ns |
| Normal Position | NC |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4051BM96G3 Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -55°C~125°C TA. In total, 16 terminations have occurred. As a result of its 8 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. The electronic part body is injected with 16 pins. There are 1 circuits in this switch device. Use CD4051 to search for variants of the digital switches. In this multiplexer, the internal resistance is 240Ohm. Datasheets for 16 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 20V to a switch device. An effective Dual, Single supply digital multiplexer. The lowest voltage the electronic part should receive is 3V. An operating current of 80nA would be sufficient for this switch device. For this multiplexer, dual supply voltage is feasible, but it should not exceed 9V. You should attach at least 2.5V voltage if you are using dual power supply. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Operating voltages of 18V are compatible with the electrical part. A 8 input needs to be operated. There are 20MHz bandwidths for data transfer.
CD4051BM96G3 Features
8 Channels
80nA Supply Current
Bandwidth: 20MHz
CD4051BM96G3 Applications
There are a lot of Texas Instruments CD4051BM96G3 Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- Routers
- Video switching
- T1/E1 Terminals
- SDH
- Medical Instrumentation
- MP3 players
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- DSUs
- Cross Connects
