CD4051BMG4

240Ohm Analog Switches BREAK-BEFORE-MAKE CD4051 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD4051BMG4
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 874
Description: 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4051 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	240Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	CD4051
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	20V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	80nA
Nominal Supply Current	100μA
Propagation Delay	60 ns
Turn On Delay Time	720 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	20MHz
Supply Current-Max (Isup)	3mA
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 30pF
On-state Resistance Match-Nom	15Ohm
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD4051BMG4 Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Around -55°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. The electronic part provides high-quality output because it has 8 channels. A 5V voltage supply should turn on and run the electronic component. There are 16 pins injected into the electronic part body. The circuits in this analogue multiplexer number 1. If you are looking for variants of the digital switch, trying search with CD4051. This digital multiplexer has 240Ohm internal resistance. Datasheets for 16 pin functions are available upon request. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 20V to the switch device in normal circumstances. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 3V is the lowest voltage that should be fed to the electronic electronic part. This multiplexer would work with 80nA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 9V. If you are using dual power supplies, you should attach at least 2.5V. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. There are SEPARATE OUTPUT outputs on this analog switch ic. 18V operating voltages are supported by the electronic component. The 8 inputs need to be operated in order to work. It is possible to transfer data over a 20MHz-bandwidth.