CD4051BNSR

240Ohm Analog Switches BREAK-BEFORE-MAKE CD4051 16 Pins 100nA 5V 16-SOIC (0.209, 5.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD4051BNSR
Package: 16-SOIC (0.209, 5.30mm Width)
Datasheet: -
Stock: 106
Description: 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4051 16 Pins 100nA 5V 16-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.209, 5.30mm Width)
Number of Pins	16
Weight	200.686274mg
Operating Temperature	-55°C~125°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	240Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	CD4051
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Polarity	Non-Inverting
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	20V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	80nA
Nominal Supply Current	100μA
Propagation Delay	60 ns
Quiescent Current	80nA
Turn On Delay Time	720 ns
Input Voltage (Min)	-0.5V
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	20.5V
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	20MHz
Supply Current-Max (Isup)	3mA
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 30pF
On-state Resistance Match-Nom	15Ohm
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height	2mm
Length	10.3mm
Width	5.3mm
Thickness	1.95mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD4051BNSR Overview

As the electronic part is packed in 16-SOIC (0.209, 5.30mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Cut Tape (CT). Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 8:1. Increasing operating temperature to around -55°C~125°C TA. Totally, there are 16 terminations. As a result of its 8 channels, this electronic component provides high-quality output. A 5V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. The multiplexer consists of 1 circuits. Try searching with CD4051 if you're looking for variants. Internally, this switch multiplexer has a resistance of 240Ohm. The datasheets for the 16 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 20V to a switch device. The digital multiplexer has a low cost Dual, Single supply. It is recommended to use 3V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 80nA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 9V. It is recommended that you attach at least 2.5V to your dual power supply. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. This analog switch ic utilizes SEPARATE OUTPUT output. Operating voltages range from 18V. Among the inputs that can be operated are the 8 inputs. There are 20MHz bandwidths for data transfer.