CD4051BNSRE4

240Ohm Analog Switches BREAK-BEFORE-MAKE CD4051 16 Pins 100nA 5V 16-SOIC (0.209, 5.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD4051BNSRE4
Package: 16-SOIC (0.209, 5.30mm Width)
Datasheet: -
Stock: 785
Description: 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4051 16 Pins 100nA 5V 16-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.209, 5.30mm Width)
Number of Pins	16
Weight	200.686274mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	240Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	CD4051
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	18V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	20V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	80nA
Nominal Supply Current	100μA
Number of Bits	8
Propagation Delay	20 ns
Turn On Delay Time	720 ns
Input Voltage (Min)	-0.5V
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	20.5V
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	20MHz
Supply Current-Max (Isup)	3mA
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 30pF
On-state Resistance Match-Nom	15Ohm
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height	2mm
Length	10.3mm
Width	5.3mm
Thickness	1.95mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD4051BNSRE4 Overview

The electrical component comes in 16-SOIC (0.209, 5.30mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Extended operating temperature around -55°C~125°C TA. In total, there are 16 terminations. The electronic part delivers high-quality output through its 8 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Circuits number 1 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with CD4051. This digital multiplexer has 240Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. A voltage higher than 20V should not normally be supplied to the switches. An effective Dual, Single supply digital multiplexer. 3V should be the lowest voltage fed to the electronic component. This multiplexer would work with 80nA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 9V. For dual power supplies, a voltage of at least 2.5V should be attached. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. There are SEPARATE OUTPUT outputs on this analog switch ic. The electronic component can function from 18V. This switch operates within the bandwidth of 20MHz. It is able to conduct in a 8-bit way.