CD4051BPWE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 240Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 18V |
| Temperature Grade | MILITARY |
| Number of Channels | 8 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 80nA |
| Nominal Supply Current | 100μA |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 720 ns |
| Input Voltage (Min) | -0.5V |
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 20.5V |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 3mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 450 ns |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 2.5V |
| Off-state Isolation-Nom | 40 dB |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4051BPWE4 Overview
The electrical component comes in TSSOP packaging, which makes it convenient to ship overseas. A total of 16 terminations have been recorded. This electronic part offers high-quality output due to its 8 channels. With a 5V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. An switch multiplexer with 240Ohm internal resistance has a value of 240Ohm. The datasheets for the 16 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 20V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 3V is the lowest voltage the electrical component should receive. In order to operate this switch device, it would need a current of 80nA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 9V. When using dual power supplies, you should attach at least 2.5V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. The electrical part can be operated at 18V voltage levels. In order to operate the 8 inputs, there are several steps to follow. Temperatures over 125°C should not be allowed for the multiplexer to operate. In this digital multiplexer, there are 1 outputs.
CD4051BPWE4 Features
8 Channels
80nA Supply Current
CD4051BPWE4 Applications
There are a lot of Texas Instruments CD4051BPWE4 Analog Switches & Multiplexers ICs applications.
- Imaging
- Precision instrumentation
- Microprocessor controlled systems
- Communication systems
- HDTV
- Frame Relay Equipment
- Remote Powered Equipment
- Public switching systems
- PDH Multiplexers
- Automotive applications
