CD4051BPWR

240Ohm Analog Switches BREAK-BEFORE-MAKE CD4051 16 Pins 100nA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD4051BPWR
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 782
Description: 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4051 16 Pins 100nA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-55°C~125°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	240Ohm
Terminal Finish	Matte Tin (Sn)
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	CD4051
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Polarity	Non-Inverting
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	20V
Min Supply Voltage	3V
Nominal Supply Current	100mA
Max Supply Current	100μA
Propagation Delay	10 ns
Quiescent Current	80nA
Turn On Delay Time	720 ns
Logic Function	Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	20MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 30pF
On-state Resistance Match-Nom	15Ohm
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Max Junction Temperature (Tj)	150°C
Drain to Source Resistance	240Ohm
Normal Position	NC
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD4051BPWR Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Cut Tape (CT). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 8:1. Extended operating temperature around -55°C~125°C TA. In total, there are 16 terminations. As a result of its 8 channels, this electronic component provides high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electrical component body receives 16 pins. It consists of 1 circuits. Search with CD4051 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 240Ohm. The datasheets for the 16 pins explain the functions. In a normalsituation, users should not supply the switches with voltage higher than 20V. Analog switch ics with Dual, Single supply type are cost-effective. 3V should be the lowest voltage fed to the electronic component. The analogue multiplexer may be damaged if voltage is greater than 100μA. For this switch, a dual supply voltage is feasible, but it must not exceed 9VIt is recommended that you attach at least 2.5V to your dual power supply. This analog switch ic utilizes SEPARATE OUTPUT output. Operating voltages of 18V are compatible with the electrical part. The electrical component supports 8 inputs. A 20MHz-bandwidth can be used for data transfer. This electronic component presents a Drain to Source resistance of 240Ohm.