CD4051BPWRG4

240Ohm Analog Switches BREAK-BEFORE-MAKE CD4051 16 Pins 100nA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD4051BPWRG4
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 238
Description: 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4051 16 Pins 100nA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 30pF
On-state Resistance Match-Nom	15Ohm
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	240Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	CD4051
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	20V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	80nA
Nominal Supply Current	100μA
Propagation Delay	20 ns
Turn On Delay Time	720 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	20MHz
Supply Current-Max (Isup)	3mA
Neg Supply Voltage-Nom (Vsup)	-5V

CD4051BPWRG4 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 8:1. Operating temperature extended to -55°C~125°C TA. In total, there are 16 terminations. The electronic part delivers high-quality output through its 8 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. The electrical component body receives 16 pins. There are 1 circuits in this multiplexer. Using the CD4051 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 240Ohm. To find out what the 16 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 20V volts for the multiplexer. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 3V is the lowest voltage that should be fed to the electronic electronic part. It would be sufficient to run this analogue multiplexer with 80nA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 9V. For dual power supplies, a voltage of at least 2.5V should be attached. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. A voltage of 18V can be used to operate the electronic component. In order to operate the 8 inputs, there are several steps to follow. A 20MHz-bandwidth can be used for data transfer.