CD4052BCMX

320ns, 150ns SP4T 240Ohm Analog Switches 4052 50nA 16-SOIC (0.154, 3.90mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-CD4052BCMX
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 713
Description: 320ns, 150ns SP4T 240Ohm Analog Switches 4052 50nA 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Supplier Device Package	16-SOIC
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2002
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	240Ohm
Max Operating Temperature	125°C
Min Operating Temperature	-55°C
Max Power Dissipation	500mW
Base Part Number	4052
Number of Outputs	2
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	15V
Min Supply Voltage	5V
Power Dissipation	500mW
Throw Configuration	SP4T
Propagation Delay	55 ns
Turn On Delay Time	1.2 μs
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	5V~15V ±2.5V~7.5V
Supply Type	Dual, Single
Bandwidth	40MHz
Turn-Off Delay Time	420 ns
Max Dual Supply Voltage	7.5V
-3db Bandwidth	40MHz
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	4:1
Current - Leakage (IS(off)) (Max)	50nA
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	320ns, 150ns
Channel-to-Channel Matching (ΔRon)	5Ohm
Crosstalk	-40dB @ 3MHz
RoHS Status	RoHS Compliant
Lead Free	Lead Free

CD4052BCMX Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -55°C~125°C TA. This electronic part offers high-quality output due to its 2 channels. On the other hand, analog switches can be constructed using SP4T switching circuits. A total of 2 circuits make up this switch device. Use 4052 to search for variants of the digital switches. Analog switches have 240Ohm internal resistance. The functions of 16 pins can be found in the datasheets. A voltage higher than 15V should not normally be supplied to the switches. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 5V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 7.5V. A dual power supply should have at least 2.5V voltage attached. There are 8 inputs to be operated. 40MHz-bandwidths can be used to transfer data between multiplexers. The switches should not operate in an environment where the temperature is higher than 125°C. Multiplexer ics with 2 outputs are available. Suppliers offer a 16-SOIC package.