banner_page

CD4052BCN

320ns, 150ns SP4T 240Ohm Analog Switches 4052 50nA 16-DIP (0.300, 7.62mm)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-CD4052BCN
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 575
  • Description: 320ns, 150ns SP4T 240Ohm Analog Switches 4052 50nA 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Supplier Device Package 16-PDIP
Weight 4.535924g
Operating Temperature -55°C~125°C TA
Packaging Tube
Published 2002
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination Through Hole
Resistance 1.05kOhm
Max Operating Temperature 125°C
Min Operating Temperature -55°C
Max Power Dissipation 700mW
Base Part Number 4052
Number of Outputs 2
Polarity Non-Inverting
Number of Channels 2
Number of Circuits 2
Max Supply Voltage 15V
Min Supply Voltage 5V
Nominal Supply Current 20μA
Power Dissipation 700mW
Throw Configuration SP4T
Propagation Delay 55 ns
Turn On Delay Time 1.2 μs
Logic Function Demultiplexer, Multiplexer, Mux
Number of Inputs 8
Voltage - Supply, Single/Dual (±) 5V~15V ±2.5V~7.5V
Supply Type Dual, Single
Bandwidth 40MHz
Turn-Off Delay Time 420 ns
Max Dual Supply Voltage 7.5V
Number of Gates 2
-3db Bandwidth 40MHz
On-State Resistance (Max) 240Ohm
Min Dual Supply Voltage 2.5V
Multiplexer/Demultiplexer Circuit 4:1
Current - Leakage (IS(off)) (Max) 50nA
Switch Circuit SP4T
Switch Time (Ton, Toff) (Max) 320ns, 150ns
Channel-to-Channel Matching (ΔRon) 5Ohm
Crosstalk -40dB @ 3MHz
Height 12.7mm
Length 12.7mm
Width 12.7mm
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

CD4052BCN Overview


The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. In Through Hole, this analog switch is mounted. 4:1 is the ratio of multiplexer to demultiplexer circuits. Around -55°C~125°C TA is the extended operating temperature. This electronic part offers high-quality output due to its 2 channels. On the other hand, analog switches can be constructed using SP4T switching circuits. It consists of 2 circuits. Try searching with 4052 to find analog multiplexer variants. As far as internal resistance is concerned, it has 1.05kOhm. Please refer to the datasheets for 16 pins functions. Users shouldn't supply more than 15V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. There should be 5V voltage fed to the electrical part below 5V. Despite this switch device's dual supply capability, its voltage should not exceed 7.5V. With dual power supplies, you should attach at least 2.5V. Among the inputs that can be operated are the 8 inputs. 40MHz-bandwidths can be used to transfer data between multiplexers. Temperatures above 125°C degrees Celsius should not be operated by the multiplexer. An output of 2 is provided by the digital multiplexer. Suppliers offer a package with 16-PDIP.

CD4052BCN Features


2 Channels
Switch Circuit: SP4T
-3db Bandwidth: 40MHz
Bandwidth: 40MHz

CD4052BCN Applications


There are a lot of ON Semiconductor CD4052BCN Analog Switches & Multiplexers ICs applications.

  • PBXs
  • Modems
  • DVD-R
  • PDAs
  • MP3 players
  • Wireless Local Loop
  • Digital access cross connects
  • Battery-powered systems
  • Fiber In The Loop (FITL)
  • Cable Telephony – NIU, Set-Top Box, Home Side Box

Write a review

Note: HTML is not translated!
    Bad           Good