CD4052BCSJ

320ns, 150ns SP4T 240Ohm Analog Switches 4052 50nA 16-SOIC (0.209, 5.30mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-CD4052BCSJ
Package: 16-SOIC (0.209, 5.30mm Width)
Datasheet: PDF
Stock: 100
Description: 320ns, 150ns SP4T 240Ohm Analog Switches 4052 50nA 16-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.209, 5.30mm Width)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2002
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	240Ohm
Max Power Dissipation	500mW
Base Part Number	4052
Number of Circuits	2
Max Supply Voltage	15V
Min Supply Voltage	5V
Power Dissipation	500mW
Propagation Delay	55 ns
Turn On Delay Time	1.2 μs
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	5V~15V ±2.5V~7.5V
Supply Type	Dual, Single
Bandwidth	40MHz
Turn-Off Delay Time	420 ns
Max Dual Supply Voltage	7.5V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	4:1
Current - Leakage (IS(off)) (Max)	50nA
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	320ns, 150ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-40dB @ 3MHz
RoHS Status	RoHS Compliant
Lead Free	Lead Free

CD4052BCSJ Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.209, 5.30mm Width). Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -55°C~125°C TA. A SP4T switching circuit is used for these analog switches. It consists of 2 circuits. Using the 4052 search parameter, you can discover variants of the switch. A 240Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 16 pins functions. In normalcircumstances, users should not exceed 15V volts for the multiplexer. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage the electronic part should receive is 5V. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 7.5V. If you are using dual power supplies, you should attach at least 2.5V. There are 8 inputs to be operated. It is possible to transfer data over a 40MHz-bandwidth.