CD4052BM96E4

SP4T 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4052 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD4052BM96E4
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 648
Description: SP4T 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4052 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	CD4052
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	18V
Power Supplies	5/15V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	20V
Min Supply Voltage	3V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	80nA
Number of Bits	4
Propagation Delay	20 ns
Turn On Delay Time	720 ns
Input Voltage (Min)	-0.5V
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	25MHz
Supply Current-Max (Isup)	3mA
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 18pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-40dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Signal Current-Max	0.01A
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	240Ohm
Subcategory	Multiplexer or Switches

CD4052BM96E4 Overview

As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 4:1. Increasing operating temperature to around -55°C~125°C TA. In total, there are 16 terminations. This electronic part offers high-quality output due to its 4 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SP4T switching circuits. The multiplexer consists of 2 circuits. Try searching with CD4052 if you're looking for variants. It has an internal resistance of 240Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Multiplexers should not be powered above 20V in normal situations. An effective Dual, Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 3V. The switch device would be able to operate with 80nA current. Despite this switch device's dual supply capability, its voltage should not exceed 9V. With dual power supplies, you should attach at least 2.5V. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The electronic component can function from 18V. In order to operate the 8 inputs, there are several steps to follow. The transfer of data can be performed over 25MHz bandwidths. It is capable of carrying out 4-bit operation.