banner_page

CD4052BM96G3

SP4T 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4052 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD4052BM96G3
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 246
  • Description: SP4T 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4052 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -55°C~125°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 240Ohm
Subcategory Multiplexer or Switches
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number CD4052
Output SEPARATE OUTPUT
Pin Count 16
Operating Supply Voltage 18V
Power Supplies 5/15V
Number of Channels 4
Number of Circuits 2
Max Supply Voltage 20V
Min Supply Voltage 3V
Analog IC - Other Type DIFFERENTIAL MULTIPLEXER
Operating Supply Current 80nA
Nominal Supply Current 80nA
Number of Bits 4
Propagation Delay 30 ns
Input Voltage (Min) -0.5V
Logic Function Demultiplexer, Multiplexer
Number of Inputs 8
Voltage - Supply, Single/Dual (±) 3V~20V ±2.5V~9V
Supply Type Dual, Single
Bandwidth 25MHz
Supply Current-Max (Isup) 3mA
Neg Supply Voltage-Nom (Vsup) -5V
Max Dual Supply Voltage 9V
On-State Resistance (Max) 240Ohm
Min Dual Supply Voltage 2.5V
Multiplexer/Demultiplexer Circuit 4:1
Current - Leakage (IS(off)) (Max) 100nA
Channel Capacitance (CS(off), CD(off)) 0.2pF 18pF
On-state Resistance Match-Nom 15Ohm
Switch Circuit SP4T
Channel-to-Channel Matching (ΔRon) 5 Ω
Crosstalk -40dB @ 10MHz
Switching BREAK-BEFORE-MAKE
Drain to Source Resistance 240Ohm
Normal Position NC
Signal Current-Max 0.01A
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CD4052BM96G3 Overview


Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 4:1. Operating temperature around -55°C~125°C TA extended. Total terminations are 16. This electronic part offers high-quality output due to its 4 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. The electronic part body is injected with 16 pins. SP4T switching circuits are used in these analog switch ics. Circuits number 2 make up this analogue multiplexer. Using the CD4052 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 240Ohm. For functions related to 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 20V volts for the multiplexer. An effective Dual, Single supply digital multiplexer. 3V should be the lowest voltage fed to the electronic component. An operating current of 80nA would be sufficient for this switch device. For this multiplexer, dual supply voltage is feasible, but it should not exceed 9V. If you are using a dual power supply, you should attach at least 2.5V. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. 18V operating voltages are supported by the electronic component. Among the inputs that can be operated are the 8 inputs. The transfer of data can be performed over 25MHz bandwidths. Drain to Source resistance is 240Ohm. 4-bits are supported.

CD4052BM96G3 Features


4 Channels
Switch Circuit: SP4T
80nA Supply Current
Bandwidth: 25MHz
Drain-to-Source resistance: 240Ohm
4-Bit

CD4052BM96G3 Applications


There are a lot of Texas Instruments CD4052BM96G3 Analog Switches & Multiplexers ICs applications.

  • ISDN NT1/TA
  • USB 1.1 signal switching circuits
  • PDH Multiplexers
  • Public switching systems
  • CSU
  • E1 Multiplexer
  • Industrial control systems
  • High reliability control systems
  • Signal routing between systems
  • Voice over IP/DSL – Integrated Access Devices, Smart

Write a review

Note: HTML is not translated!
    Bad           Good