CD4052BM96G4

SP4T 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4052 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD4052BM96G4
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 364
Description: SP4T 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4052 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	240Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	CD4052
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	20V
Min Supply Voltage	3V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	80nA
Nominal Supply Current	100μA
Number of Bits	4
Propagation Delay	20 ns
Turn On Delay Time	720 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	25MHz
Supply Current-Max (Isup)	3mA
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 18pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-40dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Signal Current-Max	0.01A
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD4052BM96G4 Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -55°C~125°C TA. In total, there have been 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. Electronic part bodies are injected with 16 pins. A SP4T switching circuit is used for these analog switches. There are 2 circuits in this switch device. CD4052 can be used to search for analog multiplexer variants. A 240Ohm internal resistance characterizes this multiplexer. The functions of 16 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 20V volts for the multiplexer. The analog switch ic is of the Dual, Single supply type and is cost-effective. There should be 3V voltage fed to the electrical part below 3V. This digital switch can be operated with a current of 80nA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 9V. When using dual power supplies, you should attach at least 2.5V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. It can operate from 18V operating voltages. The 8 inputs need to be operated in order to work. 25MHz bandwidths enable data to be transferred. It conducts in a 4-bit manner.