CD4052BMG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 240Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Base Part Number | CD4052 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 18V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 80nA |
| Nominal Supply Current | 100μA |
| Number of Bits | 4 |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 720 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 3V~20V ±2.5V~9V |
| Supply Type | Dual, Single |
| Bandwidth | 25MHz |
| Turn-Off Delay Time | 450 ns |
| Max Dual Supply Voltage | 9V |
| -3db Bandwidth | 25MHz |
| On-State Resistance (Max) | 240Ohm |
| Min Dual Supply Voltage | 2.5V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.2pF 18pF |
| Switch Circuit | SP4T |
| Channel-to-Channel Matching (ΔRon) | 5Ohm |
| Crosstalk | -40dB @ 10MHz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4052BMG4 Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Around -55°C~125°C TA is the extended operating temperature. A electrical component with 2 channels is capable of high-quality output. Circuits based on SP4T switching are used to construct these analog switch ics. There are 2 circuits in this multiplexer. Try searching for CD4052 variants of the analog switch ic. This digital multiplexer has 240Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. In normalcircumstances, users should not exceed 20V volts for the multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. 3V is the lowest voltage that should be fed to the electronic electronic part. 80nA current would be enough for this multiplexer to operate. Despite this switch's dual supply capability, its voltage should not exceed 9V. If you are using dual power supplies, you should attach at least 2.5V. 18V operating voltages are supported by the electronic component. Operating 8 inputs is required. In 25MHz-bandwidths, data can be transferred. In an environment with a temperature higher than 125°C, the digital switches should not operate. In this digital multiplexer, there are 2 outputs. Suppliers are offering a 16-SOIC package. It is able to conduct in a 4-bit way.
CD4052BMG4 Features
2 Channels
Switch Circuit: SP4T
80nA Supply Current
-3db Bandwidth: 25MHz
Bandwidth: 25MHz
4-Bit
CD4052BMG4 Applications
There are a lot of Texas Instruments CD4052BMG4 Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Voice over IP/DSL – Integrated Access Devices, Smart
- PDAs
- Battery Powered Systems
- Communication systems
- Precision instrumentation
- Multi-Line E1 Interface Cards
- Avionics test equipment
- PCMCIA cards
- Fault Tolerant Systems
