CD4052BMT

SP4T 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4052 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD4052BMT
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 602
Description: SP4T 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4052 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	CD4052
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	18V
Power Supplies	+-5V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	20V
Min Supply Voltage	3V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	80nA
Nominal Supply Current	100μA
Number of Bits	4
Propagation Delay	20 ns
Turn On Delay Time	720 ns
Input Voltage (Min)	-0.5V
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	25MHz
Supply Current-Max (Isup)	3mA
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 18pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-40dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Signal Current-Max	0.01A
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Termination	SMD/SMT
Resistance	240Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1

CD4052BMT Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Operation at a temperature around -55°C~125°C TA. Total terminations are 16. Due to its 4 channels, the electrical component produces high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 16 series. SP4T switching circuits are used in these analog switch ics. It consists of 2 circuits. Use CD4052 to search for variants of the digital switches. A 240Ohm internal resistance characterizes this multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 20V to the switch device in normal circumstances. Analogue multiplexers of the Dual, Single supply type that are cost-effective. There should be 3V voltage fed to the electrical part below 3V. This multiplexer would work with 80nA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 9V. If you are using a dual power supply, you should attach at least 2.5V. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. It can operate from 18V operating voltages. A 8 input needs to be operated. In 25MHz-bandwidths, data can be transferred. It can conduct 4-bit signals.