CD4052BNSR

SP4T 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4052 16 Pins 100nA 5V 16-SOIC (0.209, 5.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD4052BNSR
Package: 16-SOIC (0.209, 5.30mm Width)
Datasheet: -
Stock: 525
Description: SP4T 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4052 16 Pins 100nA 5V 16-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.209, 5.30mm Width)
Number of Pins	16
Weight	200.686274mg
Operating Temperature	-55°C~125°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	240Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	CD4052
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Polarity	Non-Inverting
Power Supplies	5/15V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	20V
Min Supply Voltage	3V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	80nA
Nominal Supply Current	100μA
Number of Bits	4
Propagation Delay	60 ns
Quiescent Current	80nA
Turn On Delay Time	720 ns
Input Voltage (Min)	-0.5V
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	25MHz
Supply Current-Max (Isup)	3mA
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 18pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-40dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Signal Current-Max	0.01A
Height	2mm
Length	10.3mm
Width	5.3mm
Thickness	1.95mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD4052BNSR Overview

Packed in 16-SOIC (0.209, 5.30mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Cut Tape (CT) is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Temperatures around -55°C~125°C TA are extended for operation. A total of 16 terminations have been recorded. As a result of its 4 channels, this electronic component provides high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. The analog switch ics are built using SP4T switching circuits. The multiplexer consists of 2 circuits. Using the CD4052 search parameter, you can discover variants of the switch. Analog switches have 240Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 20V to the switch device in normal circumstances. Analogue multiplexers of the Dual, Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 3V. For this digital switch to work, 80nA current would suffice. For this switch, a dual supply voltage is feasible, but it must not exceed 9VFor dual power supplies, a voltage of at least 2.5V should be attached. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. There are SEPARATE OUTPUT outputs on this analog switch ic. It can operate from 18V operating voltages. Among the inputs that can be operated are the 8 inputs. In 25MHz-bandwidths, data can be transferred. It can conduct 4-bit signals.