CD4052BPW

SP4T 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4052 16 Pins 100nA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD4052BPW
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 520
Description: SP4T 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4052 16 Pins 100nA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	240Ohm
Max Power Dissipation	200nW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	CD4052
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	18V
Power Supplies	5/15V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	20V
Min Supply Voltage	3V
Operating Supply Current	80nA
Nominal Supply Current	100μA
Number of Bits	4
Propagation Delay	60 ns
Turn On Delay Time	720 ns
Input Voltage (Min)	-0.5V
Logic Function	Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	25MHz
Supply Current-Max (Isup)	3mA
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 18pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-40dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Signal Current-Max	0.01A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD4052BPW Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tube. It is mounted in the position Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -55°C~125°C TA degrees Celsius. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 4 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. An injection of 16 pins is performed into the body of the electrical component. A SP4T switching circuit is used to build these analog multiplexers. A 2 circuit is present in this switch device. Try searching with CD4052 to find analog multiplexer variants. It has an internal resistance of 240Ohm. For functions related to 16 pins, please refer to the datasheets. Multiplexers should not be powered above 20V in normal situations. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 3V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 80nA current. If put voltage greater than 9V on the multiplexer, damage may be caused to the device. For dual power supplies, a voltage of at least 2.5V should be attached. This analog switch ic utilizes SEPARATE OUTPUT output. Operating voltages of 18V are compatible with the electrical part. Among the inputs that can be operated are the 8 inputs. It is possible to transfer data over a 25MHz-bandwidth. 4-bit operation is possible.