banner_page

CD4053BCM

320ns, 150ns SPDT 240Ohm Analog Switches 4053 50nA 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-CD4053BCM
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 182
  • Description: 320ns, 150ns SPDT 240Ohm Analog Switches 4053 50nA 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Supplier Device Package 16-SOIC
Operating Temperature -55°C~125°C TA
Packaging Tube
Published 2002
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination SMD/SMT
Resistance 1.05kOhm
Max Operating Temperature 125°C
Min Operating Temperature -55°C
Max Power Dissipation 500mW
Base Part Number 4053
Number of Outputs 3
Polarity Non-Inverting
Number of Channels 3
Voltage 15V
Number of Circuits 3
Max Supply Voltage 15V
Min Supply Voltage 5V
Nominal Supply Current 20μA
Power Dissipation 500mW
Throw Configuration SPDT
Propagation Delay 55 ns
Turn On Delay Time 1.2 μs
Logic Function Demultiplexer, Multiplexer
Number of Inputs 6
Voltage - Supply, Single/Dual (±) 5V~15V ±2.5V~7.5V
Supply Type Dual, Single
Bandwidth 40MHz
Turn-Off Delay Time 420 ns
Max Dual Supply Voltage 7.5V
Number of Gates 3
-3db Bandwidth 40MHz
On-State Resistance (Max) 240Ohm
Min Dual Supply Voltage 2.5V
Multiplexer/Demultiplexer Circuit 2:1
Current - Leakage (IS(off)) (Max) 50nA
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 320ns, 150ns
Channel-to-Channel Matching (ΔRon) 5Ohm
Crosstalk -40dB @ 3MHz
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

CD4053BCM Overview


The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tube. Multiplexers like this are mounted in the Surface Mount position. 2:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -55°C~125°C TA. This electronic part offers high-quality output due to its 3 channels. A SPDT switching circuit is used to build these analog multiplexers. The multiplexer consists of 3 circuits. If you are looking for variants of the digital switch, trying search with 4053. As far as internal resistance is concerned, it has 1.05kOhm. Datasheets for 16 pin functions are available upon request. In a normalsituation, users should not supply the switches with voltage higher than 15V. Digital switch that provides Dual, Single power at a cost-effective price. 5V is the lowest voltage that should be fed to the electronic electronic part. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 7.5V. In the case of dual power supplies, you should connect at least 2.5V. A 6 input needs to be operated. The transfer of data can be performed over 40MHz bandwidths. Temperatures over 125°C should not be allowed for the multiplexer to operate. An output of 3 is provided by the digital multiplexer. Suppliers offer a package with 16-SOIC.

CD4053BCM Features


3 Channels
Switch Circuit: SPDT
-3db Bandwidth: 40MHz
Bandwidth: 40MHz

CD4053BCM Applications


There are a lot of ON Semiconductor CD4053BCM Analog Switches & Multiplexers ICs applications.

  • CSU
  • Automotive applications
  • Switching Systems
  • HDTV
  • SDH/SONET multiplexers
  • Fault Tolerant Systems
  • Central office
  • DVD-R
  • Digital Cross-Connects
  • Remote Powered Equipment

Write a review

Note: HTML is not translated!
    Bad           Good