Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Number of Pins |
16 |
Supplier Device Package |
16-PDIP |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Published |
2002 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
1.05kOhm |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Max Power Dissipation |
700mW |
Base Part Number |
4053 |
Number of Outputs |
3 |
Polarity |
Non-Inverting |
Number of Channels |
3 |
Number of Circuits |
3 |
Max Supply Voltage |
15V |
Min Supply Voltage |
5V |
Nominal Supply Current |
20μA |
Power Dissipation |
700mW |
Throw Configuration |
SPDT |
Propagation Delay |
55 ns |
Turn On Delay Time |
1.2 μs |
Logic Function |
Demultiplexer, Multiplexer, Mux |
Number of Inputs |
6 |
Voltage - Supply, Single/Dual (±) |
5V~15V ±2.5V~7.5V |
Supply Type |
Dual, Single |
Bandwidth |
40MHz |
Turn-Off Delay Time |
420 ns |
Max Dual Supply Voltage |
7.5V |
Number of Gates |
3 |
-3db Bandwidth |
40MHz |
On-State Resistance (Max) |
240Ohm |
Min Dual Supply Voltage |
2.5V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Current - Leakage (IS(off)) (Max) |
50nA |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
320ns, 150ns |
Channel-to-Channel Matching (ΔRon) |
5Ohm |
Crosstalk |
-40dB @ 3MHz |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
CD4053BCN Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. In Through Hole, you'll find this switch device. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -55°C~125°C TA. A high-quality output is provided by the electrical component's 3 channels. A SPDT switching circuit is used for these analog switches. 3 circuits are used in this analogue multiplexer. Use 4053 to search for variants of the digital switches. It has an internal resistance of 1.05kOhm. Datasheets for functions of 16 pins are available. It is generally not recommended to supply a voltage higher than 15V to the switch device in normal circumstances. Dual, Single supply type digital switch with a low cost. A low voltage of 5V should be applied to the electronic component. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 7.5V. In the case of dual power supplies, you should connect at least 2.5V. The electrical component supports 6 inputs. The transfer of data can be performed over 40MHz bandwidths. Temperatures over 125°C should not be allowed for the multiplexer to operate. Multiplexer ics with 3 outputs are available. It is possible to purchase a 16-PDIP package from suppliers.
CD4053BCN Features
3 Channels
Switch Circuit: SPDT
-3db Bandwidth: 40MHz
Bandwidth: 40MHz
CD4053BCN Applications
There are a lot of ON Semiconductor CD4053BCN Analog Switches & Multiplexers ICs applications.
- Communication systems
- Relay Replacement
- PBX interfaces
- Battery-powered systems
- SONET
- SDH
- Communications systems
- Public switching systems
- Cable Modem
- High-Voltage