CD4053BMG4

SPDT 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4053 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD4053BMG4
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 503
Description: SPDT 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4053 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	240Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	5V
Terminal Pitch	1.27mm
Base Part Number	CD4053
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	20V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	80nA
Nominal Supply Current	100μA
Propagation Delay	20 ns
Turn On Delay Time	720 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	30MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 9pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-40dB @ 6MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Signal Current-Max	0.01A
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD4053BMG4 Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tube. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. An extended operating temperature of -55°C~125°C TA degrees Celsius. 16 terminations have been made so far. Due to its 2 channels, the electrical component produces high-quality output. A 5V voltage supply should turn on and run the electronic component. The electronic part body is injected with 16 pins. These analog multiplexers are built based on SPDT switching circuits. The multiplexer consists of 3 circuits. If you are looking for variants of the digital switch, trying search with CD4053. As far as internal resistance is concerned, it has 240Ohm. The functions of 16 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 20V. An effective Dual, Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 3V. In order to operate this switch device, it would need a current of 80nA. For this switch, a dual supply voltage is feasible, but it must not exceed 9VThe voltage should be at least 2.5V if you are using dual power supplies. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Operating voltages range from 18V. Among the inputs that can be operated are the 6 inputs. It is possible to transfer data over a 30MHz-bandwidth.