CD4053BMT
| Parameters | |
|---|---|
| On-State Resistance (Max) | 240Ohm |
| Min Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.2pF 9pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -40dB @ 6MHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Signal Current-Max | 0.01A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 1.05kOhm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4053 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 18V |
| Power Supplies | +-5V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 80nA |
| Nominal Supply Current | 100μA |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 720 ns |
| Input Voltage (Min) | -0.5V |
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 20.5V |
| Number of Inputs | 6 |
| Voltage - Supply, Single/Dual (±) | 3V~20V ±2.5V~9V |
| Supply Type | Dual, Single |
| Bandwidth | 30MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 450 ns |
| Max Dual Supply Voltage | 9V |
CD4053BMT Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Increasing operating temperature to around -55°C~125°C TA. In total, 16 terminations have occurred. A electrical component with 2 channels is capable of high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. The analog switch ics are built using SPDT switching circuits. A 3 circuit is present in this switch device. Try searching for the analog switch ic with CD4053 if you are looking for variants. This digital multiplexer has 1.05kOhm internal resistance. Please refer to the datasheets for 16 pins functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 20V. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 3V. This multiplexer would work with 80nA current. Despite this switch device's dual supply capability, its voltage should not exceed 9V. The voltage should be at least 2.5V if you are using dual power supplies. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. The electronic component can function from 18V. A 6 input needs to be operated. The data can be transferred over a wide range of bandwidths, called 30MHz bandwidths.
CD4053BMT Features
2 Channels
Switch Circuit: SPDT
80nA Supply Current
Bandwidth: 30MHz
CD4053BMT Applications
There are a lot of Texas Instruments CD4053BMT Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Cell phones
- Access Concentrators
- Voice over IP/DSL – Integrated Access Devices, Smart
- Channelized and Unchannelized DS3 applications
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Microprocessor controlled systems
- Cable Modem
- Fault Tolerant Systems
- Audio and video switching
