CD4053BNSR

SPDT 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4053 16 Pins 100nA 5V 16-SOIC (0.209, 5.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD4053BNSR
Package: 16-SOIC (0.209, 5.30mm Width)
Datasheet: -
Stock: 829
Description: SPDT 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4053 16 Pins 100nA 5V 16-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.209, 5.30mm Width)
Number of Pins	16
Weight	200.686274mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	240Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	5V
Terminal Pitch	1.27mm
Base Part Number	CD4053
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Power Supplies	5/15V
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	20V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	80nA
Nominal Supply Current	100μA
Propagation Delay	60 ns
Turn On Delay Time	720 ns
Input Voltage (Min)	-0.5V
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	20.5V
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	30MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 9pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-40dB @ 6MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Signal Current-Max	0.01A
Height	2mm
Length	10.3mm
Width	5.3mm
Thickness	1.95mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD4053BNSR Overview

Due to its 16-SOIC (0.209, 5.30mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 2:1. Extended operating temperature around -55°C~125°C TA. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 2 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. Multiplexers built on a SPDT switching circuit are built. It consists of 3 circuits. Try searching with CD4053 if you're looking for variants. This digital multiplexer has 240Ohm internal resistance. Please refer to the datasheets for 16 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. Users should never supply a voltage higher than 20V to a switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 3V. The switch device would be able to operate with 80nA current. Despite this switch's dual supply capability, its voltage should not exceed 9V. If you are using dual power supplies, you should attach at least 2.5V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. It can operate from 18V operating voltages. In order to operate the 6 inputs, there are several steps to follow. 30MHz bandwidths enable data to be transferred.