CD4053BPW

SPDT 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4053 16 Pins 100nA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD4053BPW
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 756
Description: SPDT 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4053 16 Pins 100nA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	240Ohm
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	5V
Base Part Number	CD4053
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	20V
Min Supply Voltage	3V
Operating Supply Current	80nA
Nominal Supply Current	100μA
Propagation Delay	60 ns
Turn On Delay Time	720 ns
Logic Function	Multiplexer
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	30MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 9pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-40dB @ 6MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	125Ohm
Normal Position	NC
Signal Current-Max	0.01A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD4053BPW Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tube. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Extended operating temperature around -55°C~125°C TA. 16 terminations have been made so far. A 2 channel electronic part produces high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. Into the electrical component body are injected 16 pins. Based on SPDT switching circuits, these analog multiplexers work. There are 3 circuits in this multiplexer. Use CD4053 to search for variants of the digital switches. Analog switches have 240Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. normally, users should not supply switches with voltages higher than 20V. An effective Dual, Single supply digital multiplexer. A low voltage of 3V should be applied to the electronic component. The switch device would be able to operate with 80nA current. Despite this switch's dual supply capability, its voltage should not exceed 9V. If you are using a dual power supply, you should attach at least 2.5V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Operating voltages of 18V are compatible with the electrical part. It is possible to operate 6 inputs. A 30MHz-bandwidth can be used for data transfer. The Drain to Source resistance of this electronic component is 125Ohm.