CD4053BPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 240Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Base Part Number | CD4053 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 18V |
| Polarity | Non-Inverting |
| Power Supplies | 5/15V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 80nA |
| Nominal Supply Current | 100mA |
| Propagation Delay | 60 ns |
| Quiescent Current | 80nA |
| Turn On Delay Time | 720 ns |
| Input Voltage (Min) | -0.5V |
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 20.5V |
| Number of Inputs | 6 |
| Voltage - Supply, Single/Dual (±) | 3V~20V ±2.5V~9V |
| Supply Type | Dual, Single |
| Bandwidth | 30MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 450 ns |
| Max Dual Supply Voltage | 9V |
| On-State Resistance (Max) | 240Ohm |
| Min Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.2pF 9pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -40dB @ 6MHz |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 240Ohm |
| Normal Position | NC |
| Signal Current-Max | 0.01A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4053BPWR Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Cut Tape (CT) is used. Multiplexers like this are mounted in the Surface Mount position. 2:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 2 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 16 pins. SPDT switching circuits are used in these analog switch ics. It consists of 3 circuits. Try searching with CD4053 to find analog multiplexer variants. It has an internal resistance of 240Ohm. You can find the functions of the 16 pins in the datasheets. Theswitch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 20V. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 3V. For this digital switch to work, 80nA current would suffice. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 9V. When using dual power supplies, you should attach at least 2.5V. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. This analog switch ic utilizes SEPARATE OUTPUT output. A voltage of 18V can be used to operate the electronic component. The electrical component supports 6 inputs. The transfer of data can be performed over 30MHz bandwidths. This electronic component presents a Drain to Source resistance of 240Ohm.
CD4053BPWR Features
2 Channels
Switch Circuit: SPDT
80nA Supply Current
Bandwidth: 30MHz
Drain-to-Source resistance: 240Ohm
CD4053BPWR Applications
There are a lot of Texas Instruments CD4053BPWR Analog Switches & Multiplexers ICs applications.
- Avionics and Military Systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- High speed data transmission line cards
- Medical systems
- Remote wireless modules
- Cellular phones
- Microwave transmission systems
- Battery Powered Instruments
- Audio/video switches
- SONET/SDH ADM
